As an Amazon Associate I earn from qualifying purchases.1. 3M
3M Red Acryl Glazing Putty 409gms Tube Stopper 05098 Professional Automotive Bodyfiller Car Van Bike
3M - Body filler red - For Larger Pinholes And Scatches. Same day dispatch when Ordered before 2:30pm Mon-Fri.
| Brand | 3M |
| Manufacturer | 3M |
| Part Number | 05098 |
2. Ronseal
Ronseal Smooth Finish Filler Exterior Multi Purpose Tube 330g
Ronseal - Tough and durable. For use on damp or moisture prone surfaces. Reduced sanding. Weatherproof formula touch dry in 1-2 hours. Super smooth finish.
| Brand | Ronseal |
| Manufacturer | Ronseal |
| Height | 19 cm (7.48 Inches) |
| Length | 5 cm (1.97 Inches) |
| Weight | 0.36 kg (0.79 Pounds) |
| Width | 5 cm (1.97 Inches) |
| Part Number | 36561 |
| Model | 6886444-HHW |
| Warranty | Amazon 30-day right of return |
3. Leezo
Leezo Car Body Putty Scratch Filler Painting Pen Assistant Smooth Vehicle Care Repair Tool
Leezo - Please use it in a dry and well-ventilated place. It includes a scratch filler, a special scraper, and the water sandpaper and so on.
In addition, it may not dry when using it below 0 degree Celsius. 10 to 30 degrees celsius is its optimum operating temperature. This car body putty scratch filer kit is used for filling in the pit with a depth of less than 2 mm on the paint surface, deep scratch or paint surface spalling etc.
If the temperature is too high or too low, it will affect its drying time. If the scratch filler is smeared too thick, so, its interior cannot completely harden, please control its applying thickness is about 2mm.
4. HYCOTE
Hycote XUK602 Filler Primer Spray Paint 400ml Aerosol Paint Preparation
HYCOTE - Enhanced covering power. High build and non sag formula. Yellow coloured for easy identification. Available in a 400ml pack size. Excellent adhesion to metals and rigid plastics.
| Brand | HYCOTE |
| Manufacturer | Hycote |
| Height | 26.01 cm (10.24 Inches) |
| Length | 78.69 cm (30.98 Inches) |
| Weight | 0.35 kg (0.78 Pounds) |
| Width | 26.01 cm (10.24 Inches) |
| Part Number | XUK602 |
| Model | XUK602 |
| Warranty | 2 year manufacturer |
5. UPol
Tin Silver Grey, 250 ml, UPOL UPMET/S Isopon Metalik Smooth Metallic Body Filler
UPol - Easy to apply and sand. New technology car body filler. David's isopon Metalik Filler. Comes complete with scraper for application and hardener. Polyester repair paste with aluminium for a highly polished finish. Car parts.
| Brand | UPol |
| Manufacturer | U-POL Ltd |
| Height | 35.56 cm (14 Inches) |
| Length | 91.44 cm (36 Inches) |
| Width | 60.96 cm (24 Inches) |
| Part Number | UPMET/S |
| Model | UPMET/S |
6. Balight
Balight Car Body Putty Scratch Filler Painting Pen Assistant Smooth Vehicle Care Repair Tool
Balight - If there are bubbles or small pits, please repeat the step 2-3. After complete hardening which is about 1-2 hours at room temperature, grind it to keep it flat with 320# water sandpaper.
After finishing, you can use the DIY paint care tool to repair the paint. Use 600# fine water sandpaper to smooth where needs to repair. Firstly, use the attached 320 # water sandpaper to dip in the water to treat the depressions or scratchesthe grinding area must be a little larger than the depression or scratch, and then wash the dirt and grease and dry them.
Please extrude appropriate amount of filler according to your need and fill the thin filling with the supplied special scraper, which is slightly higher than the surrounding.
7. Simply
Simply 8267 J-B Weld SteelStik Epoxy Putty
Simply - Can be drilled filed tapped machined and painted sets in 5 min Cures in 1 hour. The product is manufactured in United States. Will cure on wet and dry surfaces even completely submerged in gasoline or water.
The product is steelstik epoxy Stick easy and simple use kit. Steel reinforced epoxy putty repairs anything made of metal strength of 900 psi.
| Brand | Simply |
| Manufacturer | JB WELD LTD |
| Height | 10.5 cm (4.13 Inches) |
| Length | 3 cm (1.18 Inches) |
| Weight | 0.08 kg (0.18 Pounds) |
| Width | 3 cm (1.18 Inches) |
| Part Number | 8267 |
| Model | 8267 |
Leezo - Please use it in a dry and well-ventilated place. It includes a scratch filler, a special scraper, and the water sandpaper and so on.
Balight - If there are bubbles or small pits, please repeat the step 2-3. After complete hardening which is about 1-2 hours at room temperature, grind it to keep it flat with 320# water sandpaper.
Simply - Can be drilled filed tapped machined and painted sets in 5 min Cures in 1 hour. The product is manufactured in United States. Will cure on wet and dry surfaces even completely submerged in gasoline or water. The product is steelstik epoxy Stick easy and simple use kit. Steel reinforced epoxy putty repairs anything made of metal strength of 900 psi.
